2000 Bobst 126BMA Foilmaster

2000 Bobst 126BMA Foilmaster

  • Manufacturer: Bobst
  • Model: SP 126BMA Foilmaster
  • Year: 2000
  • Size: 49 1/4 in. x 35 3/8 in.
  • Status: In production
  • Availability: 4 months

Request Info

Specifications

  • Elevated
  • Bobst-Electronic machine operating system
  • Manual non-stop device
  • Side blowers adjustable with Centerline marks
  • Covered with an anti-static stainless steel plate
  • “Pull” guide (OS)
  • 1-Upper frame with lifting device
  • Upper transport equipment for paper, paperboard and corrugated up to 3 mm thickness.
  • Heated upper head with 16 heating zones
  • Gripper reopening zone
  • 1-Steel stamping supporting plate 23.5 mm (0.930”)
  • 1-Compensating plate
  • 1-Honeycomb chase
  • 1-Stamping plate, 2.3 mm (0.091”)
  • 1-Graduated rule for easy positioning of dies
  • Automatic non-stop apron
  • 1-Removable foil supply module including a carriage comprising of:
    • 3-motor driven advance regulating shafts
    • 2-telescopic sliding rails for reel-holders
    • 2-reel-holder axles
    • 2-additional reel holders used for off machine preparation
    • 3-sets of 8 reel holder levers with combinable 1” and 3” hubs, including:
      • 1-set of narrow reels
      • 1-set of mid-sized reels
      • 1-set of large reels
      • 15 narrow drive rollers, width 14 mm (9/16”)
      • 15 wide drive rollers, width 38 mm (1 ½”)
      • 1 movable stand (opposite operator side) for the installation or the removal of the BMA device.
    • 1-Automatic “on and off” pressure device of the paten.
    • Device mounted in the Autoplaten
      • 1-manual foil introduction device
      • 1-blower to detach the foil after stamping
      • 1-blower inside the press to stabilize the sheets before stamping or die cutting.
      • 1-device guiding the foil around the upper platen.
      • 1-motor driven foil tension shaft with cooling device
      • 1-foil tear detection system with 16 laterally adjustable photocells for immediate machine stoppage in case of a foil tear
      • 1-lateral used foil removal, combined with rotary brushes with speed according to the foil advance.

 

Request Info